Description:
The G150N50W4E is high performance Aluminum Nitride (AlN) flange
mount termination intended as a cost
competitive alternative to Beryllium
Oxide (BeO). The termination is well suited to all cellular frequency bands
such as; AMPS, GSM, DCS, PCS,
PHS and UMTS. The high power
handling makes the part ideal for terminating circulators and for use in
power combiners. The termination is also RoHS compliant! Must be mounted on a heat sinkFeatures:
mount termination intended as a cost
competitive alternative to Beryllium
Oxide (BeO). The termination is well suited to all cellular frequency bands
such as; AMPS, GSM, DCS, PCS,
PHS and UMTS. The high power
handling makes the part ideal for terminating circulators and for use in
power combiners. The termination is also RoHS compliant! Must be mounted on a heat sinkFeatures:
RoHS Compliant
150 Watts
DC – 3.0 GHz
AlN Ceramic
Non-Nichrome Resistive Element
Low VSWR
100% TestedSpecifications:
150 Watts
DC – 3.0 GHz
AlN Ceramic
Non-Nichrome Resistive Element
Low VSWR
100% TestedSpecifications:
Resistive Element :Thick Film
Substrate :AlN Ceramic
Mounting Flange :Nickel Plated Copper
Operating Temperature:-50 to +150°C (see de rating chart)
Tolerance is :±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inchesElectrical Specifications:
Substrate :AlN Ceramic
Mounting Flange :Nickel Plated Copper
Operating Temperature:-50 to +150°C (see de rating chart)
Tolerance is :±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inchesElectrical Specifications:
Resistance Value: 50 Ohms, ±2%
Power: 150 Watts
Frequency Range: DC – 3.0 GHz
Return Loss:25dB DC – 2.0 GHz 20dB DC – 3.0 GHz
Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change.Package included:
Power: 150 Watts
Frequency Range: DC – 3.0 GHz
Return Loss:25dB DC – 2.0 GHz 20dB DC – 3.0 GHz
Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change.Package included:
1 * DC-3GHz RF Termination Microwave Resistor Dummy Load RFP 150N50 150W 50 Ohms
OK
Excellent goods. fast delivery. Recommend. 5 +++
Excellent resistor
Заказ был оперативно отправлен. Дошел за 26 дней. Товар соответствует описанию. Рекомендую данный магазин к сотрудничеству.
B.U. But workers, resistance matches, the store recommend
Ordered 2 pcs, came 1 pc, CHZ dispute returned money 50%
Excellent.
Very quickly passed the order. Loads in good condition. Thank you very much, dear store.
Everything went well.
Fast shipping!
The store quickly sent the order. The load was exactly 50 ohms. Dismantling was neat. The tail is normal, you can fall.
It is disassembled from something, but working.
Доставка достаточно долгая. Сопротивление исправно, вывод на месте. Сопротивление составило порядка 50.2 Ом
Goods received. It's OK. There were a small fence at the post office, but it's thanks to the Russian post office. Resistor used, visible traces of soldering. The device showed a resistance of 49.9 ohms, if you subtract the resistance of the probes, which I have 0.2 ohms, then the resistor itself is 49,7 ohms (plus minus the error of the device). The store sent the goods the next day. The parcel was 32 days. Overall satisfied! Seller Thank you!
Very good, exact 50.1 Ohm. B U. One had been bent contact, tweezer successfully issued. The price is just a gift-looking at how much the ready loads from this can be made per penny. It came quickly that for free delivery just fantastic.
Sending operative. On the road, the parcel was sooooo long. The resistor itself is used, traces of dismantling and soldering are visible. Resistance 50.3 Ohm I will do the equivalent for VHF radios. Thank you.
The petal of the resistor is very gentle. the radio station was loaded normally.